Silicone Hose, 1 1/2" I.D. 135 degree Elbow, 4" Legs 11301 These 45 degree reducer elbow

These 45 degree reducer elbow hoses have a 38mm ID at one end and a 35mm ID at the other end to connect a 1 1/2" OD tube to a 1 3/8" OD tube

These hump connector hoses have an 80mm ID to provide a flexible coupling between two 3 1/8" OD tubes

securing with one small hose clamp

The 3-ply reinforcement results in a 4mm wall thickness (30mm / 1 3/16" and 27mm / 1 1/8" OD) and a working pressure rating over 60 psi (300 psi burst pressure)

Silicone Hose, 1 1/2" I.D. 135 degree Elbow, 4" Legs 11301 These 45 degree reducer elbowOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 135 degree elbows have a 1 1 2" ID with a smooth, shiny "wipe down" finish. The legs measure at least 4 inches long (measured from the